PE/PVDF Coated ACP Constitution Structure:
1) Protective film with Trubond/OEM brand or as requested.
2) Front side: aluminum roll coated with PE/PVDF
3) Macromolecular lamination film.
4) Core: Non-toxic polyethylene.
5) Macromolecular lamination film.
6) Rear side: Aluminum coated with primer or as requested. Aluminum composite panel sheet manufacturers
Aluminum composite panel consisting of two Aluminum cover sheets (AA1100 Series or AA3003 Series) sandwiching a non-toxic low density polyethylene core produced from a continuous extrusion process. Used for cladding, advertising. It’s usually called Aluminum composite panel, shortened as ACP or ACM.
B) Core: nontax low density polyethylene.
C) Back: Aluminum alloy sheet coated with polyester resin painting.
D) Surface coating thickness: 32μ±1μ.
E) Aluminum alloy: 3003 H24.
F) Sheet thickness: 0.3mm,0.4mm,0.5mm.
2)Dimensions:
A) Thickness: 3mm,4mm,6mm,8mm,10mm.
B) Width: 1220mm,1250mm,1500mm,1570mm,1800mm,2000mm(max).
C) Length: 2440mm,3050mm,3200mm (max:6000mm).
D) Weight: 5.5kg/sqm based on 0.5/4mm thickness.
E) Standard size:1220*2440mm.
F) Qty/20'fcl:4mm/2380sqm; 3mm/2977sqm.
G) Non-standard size are available according to requirement.
3)Standard:
A) West Europe standard (Germany DIN Standard).
B) The EAST Europe standard (Russian standard ).
C) The North America ASTM standard.
ACP compared with different products (Lightness / Rigidity):
The composite structure of Trubond results in an impressive strength-to-weight ratio, even when comparing large panel sizes.
Despite its low weight, which makes Trubond easy to transport and handle in the factory and on site, its rigidity and high
strength make the panels keep their shape and remain flat, even when exposed to extreme temperature changes. Comparison of
thickness and weight of panels with equal rigidity.
Trubond ACP compared with solid Aluminum:
Required thickness and actual weights of panels with same rigidity
Trubond ACP |
Aluminum |
||||||
Rigidity (E J) |
Section modulus |
Thickness |
Weight |
Thickness |
|||
1250 kN cm2/m |
1.25 cm3/m |
3 mm |
4.5kg/m2 |
2.7 mm |
|||
2400 kN cm2/m |
1.75 cm3/m |
4mm |
5.5kg/m2 |
3.3 mm |
|||
Panel density |
5.5kg/m2 |
Aluminium Skin Thickness |
Average 7.0 N/mm |
Tensile Strength |
52.5 Mpa |
Flexural Strength |
100.0 Mpa |
Shear Strength |
28.1 Mpa |
TRUBOND
Introducing Alucobond Exterior Wall Cladding Glossy ACP ACM Panels – the perfect solutions for creating a sleek and modern looks for your building’s exteriors. Made from a combination of aluminums composite materials, these panels offer a high-quality and durable alternative to traditional cladding options.
Easy to install, making them an option is great both TRUBOND DIY and professionals’ installments. They could be cut to sizes and customized to fit any building designs, making your building’s facades is unique and unmistakably you.
Ideal for outdoor used, which they will keep their glossy finish for decades in the future as they are weather-resistant and UV-stable, ensuring. They're fire-retardant, making them an option is safe any building.
Low maintenance and easy to clean. They are resistant to water, soiling, and staining, making them the decision is perfect areas with a high traffic and high experience of the elements. Their glossy finish makes them ideal for areas that require a luxurious and look is elegant.
Are economical and provide savings long-term. They've been made to withstand weather is harsh, which means that that they'll not need to be replaced or repaired often. Furthermore, they need minimal maintenance, meaning you'll not have to invest money and time maintaining them.
If you are looking for a high-quality and cost-effective option for your building’s exterior, look no further than TRUBOND’s Alucobond Exterior Wall Cladding Glossy ACP ACM Panels. with their durable construction, easy installation, and low maintenance requirements, these panels offer an ideal solution for creating a sleek and modern look for your building.
Our professional sales team are waiting for your consultation.
Welcome to Trumony, a factory specialized in manufacturing aluminum composite panels in Zhejiang!
