PE/PVDF Coated ACP Constitution Structure:
1) Protective film with Trubond/OEM brand or as requested.
2) Front side: aluminum roll coated with PE/PVDF
3) Macromolecular lamination film.
4) Core: Non-toxic polyethylene.
5) Macromolecular lamination film.
6) Rear side: Aluminum coated with primer or as requested. Aluminum composite panel sheet manufacturers
Aluminum composite panel consisting of two Aluminum cover sheets (AA1100 Series or AA3003 Series) sandwiching a non-toxic low density polyethylene core produced from a continuous extrusion process. Used for cladding, advertising. It’s usually called Aluminum composite panel, shortened as ACP or ACM.
A) Front: Aluminum alloy sheet coated fluor-carbon resin (PVDF) with Nano lacquer.
B) Core: nontax low density polyethylene.
C) Back: Aluminum alloy sheet coated with polyester resin painting.
D) Surface coating thickness: 32μ±1μ.
E) Aluminum alloy: 3003 H24.
F) Sheet thickness: 0.3mm,0.4mm,0.5mm.
2)Dimensions:
A) Thickness: 3mm,4mm,6mm,8mm,10mm.
B) Width: 1220mm,1250mm,1500mm,1570mm,1800mm,2000mm(max).
C) Length: 2440mm,3050mm,3200mm (max:6000mm).
D) Weight: 5.5kg/sqm based on 0.5/4mm thickness.
E) Standard size:1220*2440mm.
F) Qty/20'fcl:4mm/2380sqm; 3mm/2977sqm.
G) Non-standard size are available according to requirement.
3)Standard:
A) West Europe standard (Germany DIN Standard).
B) The EAST Europe standard (Russian standard ).
C) The North America ASTM standard.
ACP compared with different products (Lightness / Rigidity):
The composite structure of Trubond results in an impressive strength-to-weight ratio, even when comparing large panel sizes.
Despite its low weight, which makes Trubond easy to transport and handle in the factory and on site, its rigidity and high
strength make the panels keep their shape and remain flat, even when exposed to extreme temperature changes. Comparison of
thickness and weight of panels with equal rigidity.
Trubond ACP compared with solid Aluminum:
Required thickness and actual weights of panels with same rigidity
Trubond ACP |
Aluminum |
||||||
Rigidity (E J) |
Section modulus |
Thickness |
Weight |
Thickness |
|||
1250 kN cm2/m |
1.25 cm3/m |
3 mm |
4.5kg/m2 |
2.7 mm |
|||
2400 kN cm2/m |
1.75 cm3/m |
4mm |
5.5kg/m2 |
3.3 mm |
|||
Panel density |
5.5kg/m2 |
Aluminium Skin Thickness |
Average 7.0 N/mm |
Tensile Strength |
52.5 Mpa |
Flexural Strength |
100.0 Mpa |
Shear Strength |
28.1 Mpa |
TRUBOND
The External 4x8 Panel Wall Metal Cladding is the best remedy for exterior wall cladding demands, supplying longevity and design in equivalent determine. This Alucobond aluminum composite panel is composed of 2 aluminum skins along with a polyethylene center, creating a light-weight however tough panel.
The panel is recognized due to its own remarkable survive resistance, helping make it best for exterior make use of. Its TRUBOND own much higher amount polyester recoat device not merely gives different colors is heavy duty additionally safeguards it coming from rough ecological problems, being sure it continues to be impressive and heavy duty for years ahead.
Additionally gives excellent thermal and noise protection, making it an energy-efficient remedy, which may lessen power sets you back in the operate is lengthy. The panel's wetness immune style additionally assists protect against sprinkle damage, helping make it ideal for several uses being exterior.
The 4x8 panel measurements is beneficial for setup and gives a smooth appearance is outfit optimal for massive ventures. The doors may be put up utilizing sticky devices, helping make the method easy and uncomplicated, along with less components which may be called for.
This steel remedy is cladding best for make use of within business and household properties, incorporating a present-day and progressed seek to the area wall structures. The panel can be found in several different color’s choices, providing engineers and professionals adaptability to construct a property is distinct that stands out.
Made utilizing environmentally friendly methods, making it a choice is lasting ecologically aware projects. The panel is additionally totally recyclable, that makes it a remedy is optimal frameworks targeting for fresh accreditations like for case LEED.
TRUBOND's External 4x8 Panel Wall Metal Cladding supplies an exceptional combo of longevity, design, power effectiveness and sustainability, supplying a suitable remedy for exterior wall cladding. Along with its own remarkable high-top premium and performance, it is it's not surprising that why TRUBOND is a relied on brand name in the building and development field.
Our professional sales team are waiting for your consultation.
Welcome to Trumony, a factory specialized in manufacturing aluminum composite panels in Zhejiang!
