China Factory Direct Sale Aluminum Composite Panel Alucobond ACP
PE/PVDF Coated ACP Constitution Structure:
1) Protective film with Trubond/OEM brand or as requested.
2) Front side: aluminum roll coated with PE/PVDF
3) Macromolecular lamination film.
4) Core: Non-toxic polyethylene.
5) Macromolecular lamination film.
6) Rear side: Aluminum coated with primer or as requested.
aluminium composite panel sheet manufacturers
Aluminium composite panel consisting of two aluminium cover sheets(AA1100 Series or AA3003 Series) sandwiching a non-toxic low density polyethylene core produced from a continuous extrusion process.Used for cladding,advertising.It’s usually called Aluminium composite panel,shortened as ACP or ACM.
1)Material:
A) Front : aluminium alloy sheet coated fluoro-carbon resin (PVDF) with Nano lacquer.
B) Core: nontox low density polyethylene.
C) Back: aluminium alloy sheet coated with polyester resin painting.
D) Surface coating thickness: 32μ±1μ.
E) Aluminium alloy: 3003 H24.
F) Sheet thickness: 0.3mm,0.4mm,0.5mm .
2)Dimensions:
A) Thickness: 3mm,4mm,6mm,8mm,10mm.
B) Width: 1220mm,1250mm,1500mm,1570mm,1800mm,2000mm(max).
C) Length: 2440mm,3050mm,3200mm( max:6000mm).
D) Weight: 5.5kg/sqm baesd on 0.5/4mm thickness.
E) Standard size:1220*2440mm.
F) Qty/20'fcl:4mm/2380sqm; 3mm/2977sqm.
G) Non-standard size are available according to requirement.
3)Standard:
A) West Europe standard ( Germany DIN Standard).
B) The EAST Europe standard ( Russian standard ).
C) The North America ASTM standard.
ACP compared with different products( Lightness / Rigidity ):
The composite structure of Trubond results in an impressive strength-to-weight ratio, even when comparing large panel sizes.
Despite its low weight, which makes Trubond easy to transport and handle in the factory and on site, its rigidity and high
strength make the panels keep their shape and remain flat, even when exposed to extreme temperature changes. Comparison of
thickness and weight of panels with equal rigidity.
Trubond ACP compared with solid aluminium:
Required thickness and actual weights of panels with same rigidity
Trubond ACP |
|
Aluminum |
Rigidity (E J) |
Section modulus |
Thickness |
Weight |
Thickness |
|
1250 kN cm2/m |
1.25 cm3/m |
3 mm |
4.5kg/m2 |
2.7 mm |
|
2400 kN cm2/m |
1.75 cm3/m |
4mm |
5.5kg/m2 |
3.3 mm |
|
Trubond ACP Physical Properties for Panel:
Panel density |
5.5kg/m2 |
Aluminium Skin Thickness |
Average 7.0 N/mm |
Tensile Strength |
52.5 Mpa |
Flexural Strength |
100.0 Mpa |
Shear Strength |
28.1 Mpa |
TRUBOND
Looking for a durable and reliable solution to enhance your building's exterior elements? Look no further than TRUBOND's High Quality Alucobond Panel Exterior Wall Standard Size Aluminum Acp Panel Aluminum Composite.
Crafted with precision and care, this boasts a number of impressive features making it a must-have for just about any construction project. Made with a aluminum is top-quality epidermis, this panel offers exceptional durability and strength, allowing it to withstand perhaps the toughest elements and conditions without fading, cracking, or peeling.
Built to be both stylish and functional, this is perfect for enhancing the appeal is visual of building while also supplying added insulation and protection through the elements. This panel is sure to exceed your objectives whether you're searching to upgrade an old building or add a touch of contemporary beauty to a new construction project.
Simple to install and will be used for the wide selection of applications, including walls, facades, cladding, and more using its standard size design. And with its lightweight construction, it won't put strain is unnecessary your building's framework, making it an ideal choice for used in both brand new and existing buildings.
TRUBOND's High Quality Alucobond Panel Exterior Wall Standard Size Aluminum Acp Panel Aluminum Composite is the perfect choice for any constructions projects, big or small.