PE/PVDF Coated ACP Constitution Structure:
1) Protective film with Trubond/OEM brand or as requested.
2) Front side: aluminum roll coated with PE/PVDF
3) Macromolecular lamination film.
4) Core: Non-toxic polyethylene.
5) Macromolecular lamination film.
6) Rear side: Aluminum coated with primer or as requested. Aluminum composite panel sheet manufacturers
Aluminum composite panel consisting of two Aluminum cover sheets (AA1100 Series or AA3003 Series) sandwiching a non-toxic low density polyethylene core produced from a continuous extrusion process. Used for cladding, advertising. It’s usually called Aluminum composite panel, shortened as ACP or ACM.
A) Front: Aluminum alloy sheet coated fluoro-carbon resin (PVDF) with Nano lacquer.
B) Core: nontox low density polyethylene.
C) Back: Aluminum alloy sheet coated with polyester resin painting.
D) Surface coating thickness: 32μ±1μ.
E) Aluminum alloy: 3003 H24.
F) Sheet thickness: 0.3mm,0.4mm,0.5mm.
2)Dimensions:
A) Thickness: 3mm,4mm,6mm,8mm,10mm.
B) Width: 1220mm,1250mm,1500mm,1570mm,1800mm,2000mm(max).
C) Length: 2440mm,3050mm,3200mm (max:6000mm).
D) Weight: 5.5kg/sqm based on 0.5/4mm thickness.
E) Standard size:1220*2440mm.
F) Qty/20'fcl:4mm/2380sqm; 3mm/2977sqm.
G) Non-standard size are available according to requirement.
3)Standard:
A) West Europe standard (Germany DIN Standard).
B) The EAST Europe standard (Russian standard ).
C) The North America ASTM standard.
ACP compared with different products (Lightness / Rigidity):
The composite structure of Trubond results in an impressive strength-to-weight ratio, even when comparing large panel sizes.
Despite its low weight, which makes Trubond easy to transport and handle in the factory and on site, its rigidity and high
strength make the panels keep their shape and remain flat, even when exposed to extreme temperature changes. Comparison of
thickness and weight of panels with equal rigidity.
Trubond ACP compared with solid Aluminum:
Required thickness and actual weights of panels with same rigidity
Trubond ACP |
Aluminum |
||||||
Rigidity (E J) |
Section modulus |
Thickness |
Weight |
Thickness |
|||
1250 kN cm2/m |
1.25 cm3/m |
3 mm |
4.5kg/m2 |
2.7 mm |
|||
2400 kN cm2/m |
1.75 cm3/m |
4mm |
5.5kg/m2 |
3.3 mm |
Panel density |
5.5kg/m2 |
Aluminium Skin Thickness |
Average 7.0 N/mm |
Tensile Strength |
52.5 Mpa |
Flexural Strength |
100.0 Mpa |
Shear Strength |
28.1 Mpa |
TRUBOND
Presenting PE or PVDF Coated ACP/ACM Sheet/ ACP Aluminum Composite Panel, the best service for cladding and façade devices.
Constructed from aluminum doors which may be composite are coated along with either polyethylene (PE) or polyvinylidene fluoride (PVDF). These finishes deal incorporated safety and safety versus severe environment disorders, alongside versus UV radiations and blemishes, making it very long- long lasting and long-term.
Quick and easy towards set up because of their light-weight and attributes is versatile helping make all of them ideal for any type of kind of property, whether it is industrial, domestic, or institutional. The TRUBOND can be found in an option of different Colors and appearances, making it a simple job towards suit the away from properties.
Perfect for utilize within interior regions where there's confined direct visibility towards exterior components. It is waterproof and might be cleaned conveniently, helping make it perfect for utilize in kitchen areas, washrooms, along with various other regions that need a nice and atmosphere is sanitary.
Perfect for utilize in outdoors setups since it is very immune towards fading and weathering. The layer may additionally be quite immune towards chemical materials, helping make it immune towards toxins and rainfall is acid.
Isn't simply very long lasting, nonetheless it may be environmentally friendly, as its own produced along with aluminum, which may be reused conveniently. This produces it a choice is ecologically accountable property proprietors and designers that desire to decrease their carbon dioxide impact.
If you are trying to find a trustworthy and durable cladding and façade service for your property, look no more compared to TRUBOND's PE or PVDF Coated ACP/ACM Sheet/ ACP Aluminum Composite Panel. Along with its own exceptional toughness, endure protection, and environmentally friendly attributes, it is the best option for any type of type of property. Rely on the TRUBOND label for all of your cladding and façade requirements.
Our professional sales team are waiting for your consultation.